I've been looking for a true CanBus compatible LED H7 Headlight Bulb kit for a few years, but they were always too big for most motorcycle applications and simply didn't deliver the brightness our customers demand and deserve. After an exhaustive multi-year search and serious road-testing, I've found one that's small, bright, Can-Bus specific, and reasonably priced. Bam!

The Watonlight H7 LED CanBus Headlight Bulb is truly plug & play. No splicing, no wiring headaches, no brain drain, no heat issues, no depleted wallet. These should work on most motorcycles or car that uses H7 bulbs and has the space. We sell single bulbs or in pairs.

The Watonlight H7 LED CanBus Headlight Bulb is super small (the smallest I've seen) making it easy to fit into the tightest spaces. These kits are waterproof, shock-proof, last for a claimed 30,000 hours (compared to 850 hours of your oem bulb), and run cooler than either halogen or HID bulbs. Each bulb is 55w and produces a claimed 5000 lumens at a color temperature of a bright, white 6500K. For reference, your oem halogen bulb puts out only 1000 lumens. The Watonlight LED bulb is both smaller and brighter than our competition at Cyclops and offers 6 positions of angle adjustability for your specific motorcycle's headlight reflector. Each bulb plugs directly into the oem wiring harness. Install is much easier than any HID kit. Our bulbs come with a full year warranty.

The time has finally come for superior motorcycle lighting! What are you waiting for? Isn't your life worth it?

Specifications:
-Lumens Output: 5000lm each bulb / 10000lm pair
-6 positions of angle adjustability
-Color Temperature: 6500K
-Nominal Voltage DC 9-32V
-Led chip: G-XP chip / Fan cooled
-Body: Aviation-grade aluminum
-Operating temp: after 15 min of running the lights: 41.2℃
-Beam angle: 360degrees
-30,000 hours above life time
-Interface Type: H7 / 55w
-CanBus specific

Fitment: While these LED headlight bulbs are plug-n-play in any vehicle that uses H7 bulbs.. car or motorcycle.. they will NOT fit every vehicle if there's not enough room. We at Pirates Lair have no idea if they will or will not fit your bike unless somebody actually tries them and lets us know. Please check the sizing specs before ordering. (link below) You really only need 3 " room front to back and 1.45" width for the bulb. The driver module measures 2 3/4" long x 5/8" thick x 1 1/2" long. About 1/2 the size of the standard HID ballast.

Note: We tried these on a BMW K1600GTL and they were not compatible with that bike's complicated electronics.. Also.. there's not enough room on the BMW S1000RR for this bulb due to the ballast.

... Of course, if you order a kit and you find out there's not enough room for the bulb and driver, we will issue a full refund for the return minus shipping and paypal fees. Email me for installation questions.