Take me home, Captain!


Once again, Verholen of Germany is at the forefront of BMW accessory development. Their exquisitely crafted S1000XR Peg Lowering Kit is machined out of T-6 Aluminum and comes furnished with all stainless steel hardware. Bad back? Cramped legs? These should solve some of your ergonomic problems. The Verholen Lowering Kit drops your pegs by a 20mm. One benefit of the kit is they allows you to adjust your pegs forward or back. The kits fit the 2015+ S1000XR only.

We're told by the Germans that the install tales all of 20 minutes. Don't forget that lowering footpegs on any bike means less lean angle clearance. Caution is advised until you get the feel of your new lean limitations. Generally.. if you aren't scraping yours pegs now... you probably won't scrape them with the Verholen kit in place. Verholen adapters go in between your oem footpegs and your bike and are adjustable.

Passenger Adjustable Passenger Peg Lowering Kits are available via special order. There are two options. One drops the passengers pegs 40mm. The other 60mm. Your choice. We'll ask at time of order. Expect about a 2-3 week wait. They are the same price as the front kits.

BMW Shift Lever Extension - Big boots and a small shift lever make for a cheatin' wife... er.. bad ergo's. Pirates Lair offers and easy solution. This shift lever adapter, which is made right here in the USA by a fellow BMW rider, fits directly over the existing shift lever giving you the length your wife dreams about. Problem solved. This 2.5" long enlargement makes for safer shifting and easier accessibility. Simple install via a single set screw. Fits the S1000XR, R1200R, R1200RS, R1200GT, R1200RT, K1600GT, K1600GTL, K1200S, K1300S, K1200R, K1200RS , K1200GT.. These do NOT fit the K16 series BMW.

Hornig Brake Lever Extension - While you probably don't use your rear brake too often, it's still nice to be able to find it when you do need it. As you would expect.. Pirates Lair has your back. This imported slip-on brake pedal extender is machined out of aluminum and has a natural anodized finish. The surface is slotted to avoid slipping. This enlargement simply slips on and is held in place with two set-screws. Chimp-easy install. Fits the S1000XR / K1200S / K1300S / K1200R / 2006 & Up K1200GT. These do NOT fit the K16 series BMW.

You may be wondering.. Do I need these extensions to go with your Verholen Peg Lowering Kit?? Some do.. Some don't .I personally think our extensions compliment the lowering kit as it brings the shift lever and/or brake lever out similarly to the new peg position.


BMW 2015+ S1000XR
907921
BMW S1000XR Peg Lowering Kit $195.US (USPS Priority Shipping Included)
908654
BMW S1000XR Passenger Peg Lowering Kit $195.US (USPS Priority Shipping Included)
0102
Hornig S1000XR Brake Pedal Etension $66.US (USPS Priority Shipping Included)
BMW Shift Lever Extension $44.US (USPS Priority Shipping Included) Temp Unavailable! Call!