Once again, Verholen of Germany is at the forefront of BMW accessory development. Their exquisitely crafted R1200RT LC / R12050RT Peg Lowering Kit is machined out of T-6 Aluminum and comes furnished with all stainless steel hardware. Bad back? Cramped legs? These should solve some of your ergonomic problems.

The Verholen Peg Lowering Kit drops your pegs by a full 40mm. The adapter can be mounted upwards or downwards. One benefit of the kit is they allows you to adjust your pegs forward or back. We have kits for the 2009+ R1200RT LC and R1250RT.

We're told by the Germans that the install tales all of 20 minutes. Don't forget that lowering footpegs on any bike means less lean angle clearance. Caution is advised until you get the feel of your new lean limitations. Generally.. if you aren't scraping yours pegs now... you probably won't scrape them with the Verholen kit in place. Verholen adapters go in between your oem footpegs and your bike and are adjustable.

Hornig Shift Lever Extension - Big boots and a small shift lever make for a cheatin' wife... er.. bad ergo's. Pirates Lair offers and easy solution. This natural anodized shift lever adapter (also made in Germany) fits directly over the existing shift lever giving you the length your wife dreams about. Problem solved. This enlargement makes for safer shifting and easier accessibility. Simple install. Add a dab of silicone on your oem shift lever, slide the Hornig piece over, then let it set overnight. Done. Fits the R1250RT / R1200 LC / R1200RS / S1000XR / K1600GT / K1600GTL / K1600 Bagger, K1200S / K1300S / K1200R / K1200GT / S1000XR.

Note: We've been told by customers that these will also fit the Concours 14, Versys, ZX-14, and Honda Blackbirds. We suspect they'll fit other bikes as well but we have NOT tried them on others.

You may be wondering.. Do I need these extensions to go with your Verholen Peg Lowering Kit? Some do.. Some don't. I personally think our extensions compliment the lowering kit as it brings the shift lever and/or brake lever out similarly to the new peg position.