Once again, Verholen of Germany is at the forefront of BMW accessory development. Their exquisitely crafted R1250R / R1250RS Peg Lowering Kit is machined out of T-6 Aluminum and comes furnished with all stainless steel hardware. Bad back? Cramped legs? These should solve some of your ergonomic problems. The Verholen Lowering Kit drops your pegs by a full 40mm. One benefit of the kit is they allows you to adjust your pegs forward or back. The kits fit the R1250RS, R1250R, 2015+ R1200R LC, and R1200RS LC

We're told by the Germans that the install tales all of 20 minutes. Don't forget that lowering footpegs on any bike means less lean angle clearance. Caution is advised until you get the feel of your new lean limitations. Generally.. if you aren't scraping yours pegs now... you probably won't scrape them with the Verholen kit in place. Verholen adapters go in between your oem footpegs and your bike and are adjustable.

Note(s) : Passenger Adjustable Passenger Peg Lowering Kits are available via special email request. The passenger footpeg lowering adapter kit comes pre-adjusted by Verholen. They should be kept as is and not altered. Pretty sure they can not be adjusted straight down on the 2022-2023 due to the oem exhaust on one side. We do also add a photo of this to the installation instructions included in the kit. 2. The shift extension pictured at right is NOT the one we sell.

Hornig Brake Lever Extension - While you probably don't use your rear brake too often, it's still nice to be able to find it when you do need it. As you would expect.. Pirates Lair has your back with these options.. This imported slip-on brake pedal extender is machined out of aluminum and has a natural anodized finish. The surface is slotted to avoid slipping. This enlargement simply slips on and is held in place with two set-screws. 6.5cm= 2 9⁄16" long & 2.9cm= 1 9⁄64" wide. Chimp-easy install. Fits the R1250RS, R1250R, 2015+ R1200R, R1200RS only.

Hornig Shift Lever Extension - Big boots and a small shift lever make for a cheatin' wife... er.. bad ergo's. Pirates Lair offers and easy solution. This natural anodized shift lever adapter (also made in Germany) fits directly over the existing shift lever giving you the length your wife dreams about. Problem solved. This enlargement makes for safer shifting and easier accessibility. Simple install. Add a dab of silicone on your oem shift lever, slide the Hornig piece over, then let it set overnight. Done. Fits the R1250RS / R1250R / R1200RS / R1200R / R1200RT / R1250RT / S1000XR / K1600GT / K1600GTL / K1600 Bagger, K1200S / K1300S / K1200R / K1200GT / S1000XR. Note: We've been told by customers that these will also fit the Concours 14, Versys, ZX-14, and Honda Blackbirds. We suspect they'll fit other bikes as well but we have NOT tried them on others.

You may be wondering.. Do I need these extensions to go with your Verholen Peg Lowering Kit?? Some do.. Some don't I personally think our extensions compliment the lowering kit as it brings the shift lever and/or brake lever out similarly to the new peg position.