Once again, Verholen of Germany is at the forefront of motorcycle accessory development. Their exquisitely crafted K1300GT / K1200GT Peg Lowering Kits are machined out of T-6 Aluminum and come furnished with all stainless steel hardware. It is the solution for cramped legs and bad ergonomics. The "GT" Lowering Kit drops your pegs by a full 40mm and the icing on the cake.... allows you to adjust your pegs forward or back.

*BMW K1300GT Compatibility: While this kit was designed for the BMW K1200GT and advertised by Verholen for only the K1200GT.. I actually helped install a kit on a 2010 K1300GT and the install is actually pretty damn easy. Basically..one of the mounting pins has to be tapped into place or have it's head slightly ground off to clear a mounting bolt. You know what I mean once you see it. Takes only a few minutes to make the minor mod.

Relatively easy install in spite of the typically bad German instructions. We advise using blue-strength Loctite during install...

Don't forget, friends, lowered footrests are much more likely to drag when cornering. Please use caution. Fits the 2006-08 BMW K1200GT and K1300GT.*

Hornig K1300GT / K1200S / K1200R / 2006 -08 K1200GT Brake Lever Extension / While you probably don't use your rear brake too often, it's still nice to be able to find it when you do need it. As you would expect.. Pirates Lair has your back. This imported Hornig slip-on brake pedal extender is machined out of aluminum and has a natural anodized finish. The surface is slotted to avoid slipping. This enlargement simply slips on and is held in place with two set-screws. Chimp-easy install. These do NOT fit the K16 series BMW.

Hornig Shift Lever Extension / Big boots and a small shift lever make for a cheatin' wife... er.. bad ergo's. Pirates Lair offers and easy solution. This natural anodized shift lever adapter (also made in Germany) fits directly over the existing shift lever giving you the length your wife dreams about. Problem solved. This enlargement makes for safer shifting and easier accessibility. Simple install. Add a dab of silicone on your oem shift lever, slide the Hornig piece over, then let it set overnight. Done. Fits the K1300GT / K1200GT / R1200RS / S1000XR / K1600GT / K1600GTL / K1600 Bagger, K1200S / K1300S / K1200R / S1000XR. Note: We've been told by customers that these will also fit the Concours 14, Versys, ZX-14, and Honda Blackbirds. We suspect they'll fit other bikes as well but we have NOT tried them on others.

2009+ K1300GT With Shift Assist: The standard Verholen Peg Lowering Kit does NOT include a rod extension for bikes with the shift assist feature. However.. we can sell this extension off another brand kit for $20. That piece looks like this.. Call us if interested at 828.628.7093 EST