Take me home, Capitan!


Old methods of power distribution have gone the way of the floppy disk. It’s outdated technology. With the PDM60, there’s no more blown fuses, tangled wiring, overloaded circuits, CanBus related power interruptions, confusion, or frustration. The PDM60 is fully user programmable via the PDM60 dashboard software. You can set circuit triggering/switching methods, delay circuit activation/deactivation, and individual circuit amperage levels.

With the PDM60 you get six power circuits and 60 Amps of power handling capability. That's enough to handle all of your accessories.. radar detector, lights, horns, heated gear or grips, GPS, cell phone, flux capacitor, etc, etc...

With the PDM60 installed, adding or removing aftermarket electrical devices\electronics is a breeze. It eliminates the need to check or replace fuses. It eliminates the need to install relays to power higher amperage applications like driving lights, heated clothing, Stebel horns, etc. It completely eliminates any potential for current draw related problems commonly associated with CanBus style electrical systems.

Plain and simple, with the PDM60, your bike will be better equipped and better protected. Stop turning your ride into a Frankenbike with splices and wiring and electrical tape stretched all over creation. Move into the 21st century. I finally wised up and I'm glad I did.

---------------------------------------------------------------------------------------

* Easy Install: Easy to configure, easy to install, and easy to own. Just hook up the power and ground and then the ignition trigger wire to any switched circuit. Done. Customer support available for the electrically challenged.

* Rock Solid: Tested for over 1,000,000 (yes...one million) cycles, under a full 60 amp load, and still running strong!

* Completely Sealed: Fully encapsulated in an industrial grade, hi-temp, potting material to make it fully water, weather, and dust proof from even the harshest of environments.

* Clean: The compact size, 2”H x 3”W x .9”D, combined with the easy one wire outputs, allows you to install and wire all your accessories without having the finished product looking like a birds nest. It’s about the size of a business card, and less than an inch thick

* Customizable: The easy to use dashboard allows everyone to set up the PDM60 exactly how they want it for their accessories and their vehicle of choice. Down the road if things change, or you add more accessories, all you have to do is reprogram it to your liking and you are off and riding again.

* CanBus Compatible: If you have a CanBus type electrical system on your vehicle of choice, no fear! The PDM60 is completely CanBus compatible. You can wire the trigger wires right into the CAN system and it won't even know that it is there.

* Applications:The PDM60, which is made in the USA, will work on virtually any modern motorcycle.


PDM60 Quick Start Guide .. Click Here
Mounting Position on BMW K1200S .. Click Here

PDM60
PDM60 Power Distribution Module $220.US (USPS Priority Shipping Included)