![]() |
![]() |
|
Pirates' Lair is proud to offer our Ducati customers the finest stands on the market... the legendary Pit Bull Stand.. The Hybrid Front Fork-Lift Wheel Stand (above left) is based upon a modular design and can be easily converted to lift from the lower triple tree instead of the lower forks with the addition of a few parts. (available separately). We also offer the One-Arm Rear Reversible Wheel Stand (above right.) The F0027B-000 stand comes with two pins: the D (left side) and DR (right side) as the openings are different sizes. Changing the pins takes about 1 minute. When installed on the left side it allows for rear wheel removal. When installed on the right, it allows for easy sprocket changes or removal.. On the left side, the handle is forward of the bike. On the right side, the handle is behind the bike. Simply the best of both worlds. Fits every Ducati Panigale, 1198, 1098, Streetfighter, Multistrada 1200, and Diavel.* *Note the Diavel has too wide of a tire to be lifted from the right side safely. The pin will not go all the way into the hole on the right side. The F0029-000 One Armed Rear, Ducati Reversible fits the Ducati 998/996/916/848/748, HyperMotard, Monster 1100, Monster S4R, Monster S2R, 1100 Multistrada, M900E. LH and RH. The US made
Pit Bull stands allow for one person easy operation without the
fear of your $16,000.00+ toy crashing to the ground when lifting. Can be adapted to work on virtually all single-sided swingarm
bikes if you change out the pin (available directly from Pit
Bull) |
|
F0100-100 |
|
F0027B-000 |
F0029-000 |
|
|
|
|